Safety Data Sheet (SDS)
CleverCOAT wood finish
Date of generation: 11.12.2018
In compliance with Regulation (EC) 1907/2006/EC
1. Identification of the substance/preparation and of the company/undertaking
1.1. Product identifier:
1.1.1. Product description:
preparation of modified hybrid materials in aqueous solution for wood protection;
1.1.2. Label print name:
CleverCOAT wood finish;
1.1.3. Chemical Family:
1.2. Relevant identified uses of the substance or mixture and uses advised against:
Second step product of two steps protection: for wood protection with waterproofing effect, clean effect and increasing durability of the wood surfaces. Effective protection against microbiota, fouling, algae, spores, fungi, wood decay and harmful insects.
1.3. Details of the supplier of the safety data sheet:
1.3.1. Company name:
Voka, 41701, Estonia;
1.3.4. Company e-mail for SDS:
1.3.5. Emergency telephone number:
2. Hazards identification
2.1. Classification of the substance or mixture:
not classified as dangerous substance or mixture;
not need notice phrase.
2.2. Label elements:
no pictogram is used;
no signal word is used.
2.3. Other hazards:
no other hazards.
3. Composition/information on ingredients
|Name||CAS №||EINECS №||Content, %||Classification / REGULATION (EC) No 1272/2008|
|Doesn’t content dangerous components|
4. First aid measures:
4.1. Description of first aid measures:
4.1.1. Eye contact:
rinse immediately with plenty of water, holding the eyelids open;
4.1.2. Skin contact:
Wash the skin with soap and water;
Rinse mouth with water. Drink much water. No retch;
no harmful effect is detected during usual application. Go to fresh air.
4.2. Most important symptoms and effects, both acute and delayed:
4.2.1 Eye contact:
Can cause an allergic reaction;
4.2.2. Skin, inhalation and Ingestion contact:
Can cause an allergic reaction;
4.3. Indication of any immediate medical attention and special treatment needed:
4.3.1 Eye contact:
Seek medical advice if effects persist;
4.3.2 Skin contact:
If skin allergic persists, consult a specialist;
consult with specialist if necessary;
Seek medical advice if effects persist.
5. Firefighting measures
5.1. Extinguishing media:
product is not a fire hazard. Use water spray, Dry chemical, Foam, Carbon dioxide (CO2). Prevent fire extinguishing water from contaminating surface water or the ground water system. Collect contaminated fire extinguishing water separately. This must not be discharged into drains. Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations.
5.2. Special hazards arising from the substance or mixture
5.3. Advice for firefighters:
No special measures required.
6. Accidental release measures
6.1. Personal precautions:
Wear protective gloves and protective clothes (see section 8).
6.2. Environmental precautions:
Attempt all safety precautions to prevent environmental pollution.
6.3. Methods for cleaning up:
For cleanup use inert adsorbent, for example wood sawdust. Leakage or spillage with sawdust collect and utilize according to local regulations.
6.4. Reference to other sections:
Spilled product makes slippery surface.
7. Handling and storage
7.1. Precautions for safe handling:
Use closed vessels. General ventilation is recommended
7.2. Conditions for safe storage, including any incompatibilities:
Storage in closed vessels. Keep separately from foodstuff, drinks, fodder. Avoid solar gain.
7.3. Specific end use(s):
When contact with clothing can be spots
8. Exposure controls/personal protection
8.1. Control parameters:
8.2. Exposure controls:
8.2.1. Precautions in working area:
use the personal protection equipment. Wash hands before drink, eat, toilet;
8.2.2. Respiratory protection:
Presence sufficient ventilation;
8.2.3. Hand protection:
Use protective gloves;
8.2.4. Eye protection:
Avoid contacting with eyes. Wear close fitting goggles or a face visor if there is a risk of splashing;
8.2.5. Environmental exposure controls:
Take care to avoid the contamination of watercourses and drains and inform the appropriate authority in case of accidental contamination of watercourses.
9. Physical and chemical properties
9.1. Information on basic physical and chemical properties:
|Form||Water silicone emulsion|
|Odour||weak specific odor|
|pH-value at 20 °C||9.0 - 10.5|
|Viscosity, cSt||75 - 100|
|Freezing point, °C||between -2 to -5|
|Boiling point, °C||> 100|
|Volatile organic compound (VOC), g/l||kat A/f containing 0|
|Flammability (solid, gaseous)||Not determined.|
|Oxidizing properties||Not determined|
|Vapor pressure||As aqueous solutions|
|Dilution with water||in any ratio|
9.2. Other information:
10. Stability and reactivity
the product is stable under normal conditions of storage, handling and use.
10.2. Chemical stability:
The product is stable under normal conditions of storage, handling and use.
10.3. Possibility of hazardous reactions:
No possibility of hazardous reactions.
10.4. Conditions to avoid:
No condition to avoid.
10.5. Incompatible materials:
No incompatible materials.
10.6. Hazardous decomposition products:
No hazardous decomposition products.
11. Toxicological information
11.1. Information on toxicological effects:
12. Ecological information
12.2. Persistence and degradability
12.3. Bioaccumulative potential
12.4. Mobility in soil:
12.5. Results of PBT and vPvB assessment:
this product is not identified as a PBT substance.
12.6. Other adverse effects:
13. Disposal considerations
13.1. Waste treatment methods
In accordance with local and national regulations.
14. Transport information
14.1. UN number:
14.2. UN proper shipping name:
14.3. Transport hazard class(es):
14.4. Packing group:
14.5. Environmental hazards:
14.6. Special precautions for user:
See section 7.
14.7. Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code:
See section 7.
14.8. Railway (RID), Surface transport (ADR), Sea (IMDG), Air (OACI) transport:
15. Regulatory information
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture:
15.1.1. Regulation (EC) No 1907/2006 – REACH of 18 December 2006 concerning the Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) and establishing a European Chemicals Agency.
15.1.2. REGULATION (EC) No 1272/2008 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 16 December 2008 on classification, labeling and packaging of substances and mixtures, amending and repealing Directives 67/548/EEC and 1999/45/EC, and amending Regulation (EC) No 1907/2006.
15.1.3. COMMISSION REGULATION (EU) No 453/2010 of 20 May 2010 amending Regulation (EC) No 1907/2006 of the European Parliament and of the Council on the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH).
15.1.4. EV Kemikaaliseadus ja nende alusel kehtestatud määrused.
15.1.5. EV Jäätmeseadus ja nende alusel kehtestatud määrused.
15.2. Chemical safety assessment: chemical safety assessment is prepare according to COMMISSION REGULATION (EU) No 453/2010 of 20 May 2010.
16. Other information
16.1. Further information:
User’s manual presents in label and producer’s site.
16.2. Additional information:
The information provided in this Safety Data Sheet is result of careful testing and knowledge of NANOFORMULA LTD.
16.3. This information helps provide safe work and belief at the date of its publication. The given information is designed only as guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. We hope that this document will be useful and will be appreciate if receive additional information about safe work with it.