Download safety data sheet in PDF format  …  CleverSEPT Safety Data Sheet

Safety Data Sheet (SDS)

CleverCOAT for car exterior

Date of generation: 14.12.2018
In compliance with Regulation (EC) 1907/2006/EC

1. Identification of the substance/preparation and of the company/undertaking

1.1. Product identifier:

1.1.1. Product description:

Ethanol-based liquid disinfectant;

1.1.2. Label print name:

CleverSEPT disinfectant for hands and surfaces;

1.1.3. Chemical Family:

Alkyl silicate.

1.2. Relevant identified uses of the substance or mixture and uses advised against:

Disinfectant liquid for hands and surface. Biocide.
Product type: 1,2

1.3. Details of the supplier of the safety data sheet:

1.3.1. Company name:

Nanoformula LTD

1.3.2. Street:

Narva mnt.4;

1.3.3. Place:

Voka, 41701, Estonia;

1.3.4. Company e-mail for SDS:;

1.3.5. Emergency telephone number:


2. Hazards identification

2.1. Classification of the substance or mixture:

Regulation (EC) No 1272/2008.

Flam Liq.1 H225
Eye Irrit.2 H319
Signal word: GHS02 Flammable, GHS07 Warning

2.2. Label elements:

Contains: 75-80% v/v denatured ethanol

Hazard statements:
H225 Highly flammable liquid and vapor.
H319: Causes serious eye irritation.

Precautionary statements:
P233: Keep container tightly closed.
P102: Keep out of reach of children.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P210: Keep away from heat/sparks/open flames/hot surfaces. — No smoking.

2.3. Other hazards:

2.3.1. Health hazard:

Harmful if swallowed.

2.3.2. Environmental hazards

Not hazardous

3. Composition/information on ingredients

3.1. Substances:

Name CAS No. EINECS No. Content, % Classification / REGULATION (EC) No 1272/2008
Ethanol 64-17-5 200-578-6 75-80 % v/v Flam. Liq. 2 - H225
Eye Irrit.2 - H319
Glycerin 58-81-5 200-289-5 1-2% Not applicable
2-Butanone 78-93-3 201-159-0 <0,6% Flam. Liq. 2 - H225
Eye Irrit. 2 - H319
STOT SE 3 - H336
Isopropanol 67-63-0 200-661-7 1-5% Flam. Liq. 2 - H225
Eye Irrit. 2 - H319
STOT SE 3 - H336
Hydrogen peroxide 7722-84-1 231-765-0 0,10-0,15% Ox. Liq. 1 (H271)
Acute Tox. 4 (H302)
Acute Tox. 4 (H332)
Skin Corr. 1A
(H314) Eye Dam. 1

4. First aid measures:

4.1. Description of first aid measures:

4.1.1. Eye contact:

Rinse immediately with plenty of water, holding the eyelids open;

4.1.2. Skin contact:

Wash off with soap and plenty of water;

4.1.3. Inhalation:

No harmful effect is detected during usual application. Go to fresh air;

4.1.4. Ingestion:

Rinse mouth with water. Drink much water. No retch.

4.2. Most important symptoms and effects, both acute and delayed:

4.2.1 Eye contact:

Can cause an allergic reaction;

4.2.2. Skin, inhalation and Ingestion contact:

Can cause an allergic reaction;

4.3. Indication of any immediate medical attention and special treatment needed:

4.3.1 Eye contact:

Seek medical advice if effects persist;

4.3.2 Skin contact:

If skin allergic persists, consult a specialist;

4.3.3 Inhalation:

Consult with specialist if necessary;

4.3.4 Ingestion:

Seek medical advice if effects persist.

5. Firefighting measures

5.1. Extinguishing media:

Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. In case of fire, cool containers sprayed with water.

5.2. Special hazards arising from the substance or mixture:

Do not use a water stream as it may scatter and spread fire.

Flammable. Risk of ignition. Vapors may form explosive mixtures with air. Vapors may be expanding.

5.3. Advice for firefighters:

As with any fire, wear self-contained breathing apparatus, MSHA / NIOSH (approved or equivalent) full protective suit.

6. Accidental release measures

6.1. Personal precautions, protective equipment and emergency procedures:

Use personal protective equipment. Ensure adequate ventilation. Remove all sources of ignition. Avoid generation of static electricity.

6.2. Environmental precautions:

The environment should not be released. Do not flush into surface water or sanitary sewer system.

6.3. Methods for cleaning up:

For cleanup use inert adsorbent, for example wood sawdust. Leakage or spillage with sawdust collect and utilize according to local regulations.

6.4. Other information:

Protection methods are in Sections 8 and 13.

7. Handling and storage

7.1. Precautions for safe handling:

Wear personal protective equipment. Avoid contact with eyes, skin or clothing. Ensure adequate ventilation. Avoid ingestion and inhalation. Keep away from open flames, hot surfaces and sources of ignition. Do not use equipment that may cause sparks. All metal parts must be earthed to prevent electrostatic ignition of the vapors. Avoid generation of static electricity.

7.2. Conditions for safe storage, including any incompatibilities:

Keep containers tightly closed in a dry, cool and well-ventilated place. Keep away from open flames, hot surfaces and source of ignition. Flammable substances area. Keep away from heat and sources of ignition.

7.3. Hygiene measures:

Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feeding stuffs. Do not eat, drink or smoke during handling. Wash contaminated clothing before reuse. Wash hands before breaks and at the end of the working day.

7.4. Special use:

Data not available

8. Exposure controls/personal protection

8.1. Control parameters. Substances for which occupational exposure limit values must be monitored in the work environment (Government of the Republic Regulation No. 293 of 18 September 2001):

8.1.1. Ethanol:

TWA: 300 ppm / 8 hours.
TWA: 1000 mg/m3/ 8 hours.
STEL: 900 ppm / 15minutes.
STEL: 1920 mg/m3 / 15minutes.

8.1.2. Glycerin:

Piirnorm 10 mg/m3

8.1.3. Hydrogen peroxide:

TWA: 1 ppm / 8 hours.
TWA: 1.4 mg/m3 / 8hours.
STEL: 2 ppm / 15 minutes.
STEL: 3 mg/m3 / 15minutes.

8.1.4. 2-Butanone:

TWA: 200 ppm / 8 hours.
TWA: 600 mg/m3 / 8 hours.
STEL: 300 ppm / 15minutes.
STEL: 900 mg/m3 / 15minutes.

8.1.5. Isopropanol:

TWA: 150 ppm / 8 hours.
TWA: 350 mg/m3 / 8 hours.
STEL: 250 ppm / 15minutes.
STEL: 600 mg/m3 / 15minutes.

8.2. Exposure controls:

8.2.1. Technical measures:

Ensure adequate ventilation, especially in confined areas. Use explosion-proof electrical system / ventilation / lighting / tools. Make sure eyewash stations and safety showers are close to the workplace.

Wherever possible, engineering controls such as process isolation or enclosure should be applied, introducing process or equipment changes to reduce emissions or contact and properly designed use of ventilation systems to control hazardous materials at source.

8.2.2. Skin and body protection:

Long-sleeved clothing.

8.2.3. Respiratory protection:

If workers are exposed to concentrations above the exposure limit, they must wear appropriate, certified respirators.

8.2.4. Hand protection:

Protective gloves.

8.2.5. Eye protection:

Safety goggles (EU standard - EN 166).

8.2.6. Environmental exposure controls:

Prevent product from entering drains. Avoid groundwater contamination.

9. Physical and chemical properties

9.1. Main physical and chemical properties:

Appearance Clear liquid
Color Colorless
pH, 20°C 6.5 – 7.5
Melting point / range Not available
Boiling point / boiling range, °C 78
Flash point, °C 25
Evaporation rate, °C Not determined.
Flammability (solid, gas) Not applicable
Auto-ignition temperature, °C 363-425 ( 100% ethanol)
Explosion limit: Lower 3.3 vol %
Upper 19 vol %
Vapor pressure No data
Density, g/cm3 , 20°C 0,830 - 0,855
Solubility Solubility in water - miscible

9.2. Other information:


10. Stability and reactivity

10.1. Reactivity:

The product does not contain any substances which, under normal use, could cause dangerous reactions

10.2. Chemical stability:

The product is stable under normal conditions of storage, handling and use.

10.3. Possibility of hazardous reactions:

No dangerous reactions known.

10.4. Conditions to avoid:

Avoid heat, sparks and open flame.

10.5. Incompatible materials:

Avoid strong oxidizing agents, strong acids.

10.6. Hazardous decomposition products:

Under normal conditions, none.

11. Toxicological information

11.1. Information on toxicological effects:

Not classified as acutely toxic.

11.2. Irritant and corrosive:

May be irritating to eyes and skin.

11.3. Subacute, subchronic and long-term toxicity:

Overexposure may cause headache, dizziness, fatigue, nausea and vomiting.

12. Ecological information

12.1. Toxicity:

No environmental damage is known or expected under normal use.

12.2. Persistence and degradability:

12.2.1. Biodegradable Ethanol:

Readily biodegradable. BOD5 37 - 86%

12.3. Bioaccumulation:

12.3.1. Ethanol:

Log Pow = -0.32, weak

12.4. Mobility in soil:

The product is miscible with water and thus with varying levels in soil and water.

12.5. Assessment of persistent, bio accumulative and toxic properties and of very persistent and very bio accumulative properties (PBT and vPvB):

This product does not contain any substances that have been assessed as PBT or vPvB.

12.6. Other adverse effects:

Data not available.

13. Disposal considerations

13.1. Waste treatment methods:

Liquid can end up in the sewers, if necessary, ask the local rescue service.

14. Transport information

14.1. UN number:


14.2. UN proper shipping name:

Ethanol solution

14.3. Transport hazard class(es):


14.4. Packing group:


14.5. Environmental hazards:

Not classified as dangerous goods.

14.6. Special precautions for user:

See section 7.

14.7. Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code:

See section 7.

14.8. Railway (RID), Surface transport (ADR), Sea (IMDG), Air (OACI) transport:


15. Regulatory information

15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture:

15.1.1. Regulation (EC) No 1907/2006 – REACH of 18 December 2006 concerning the Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) and establishing a European Chemicals Agency.

15.1.2. REGULATION (EC) No 1272/2008 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 16 December 2008 on classification, labeling and packaging of substances and mixtures, amending and repealing Directives 67/548/EEC and 1999/45/EC, and amending Regulation (EC) No 1907/2006.

15.1.3. COMMISSION REGULATION (EU) No 453/2010 of 20 May 2010 amending Regulation (EC) No 1907/2006 of the European Parliament and of the Council on the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH).

15.1.4. EV Kemikaaliseadus ja nende alusel kehtestatud määrused.

15.1.5. EV Jäätmeseadus ja nende alusel kehtestatud määrused.

15.2. Chemical safety assessment: chemical safety assessment is prepare according to COMMISSION REGULATION (EU) No 453/2010 of 20 May 2010.

16. Other information

16.1. Further information:

User’s manual presents in label and producer’s site.

16.2. Additional information:

The information provided in this Safety Data Sheet is result of careful testing and knowledge of NANOFORMULA LTD.

The information provided in this Safety Data Sheet is result of careful testing and knowledge of NANOFORMULA LTD.

This information helps provide safe work and belief at the date of its publication. The given information is designed only as guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification.

We hope that this document will be useful and will be appreciate if receive additional information about safe work with it.