Download technical data sheet in PDF format … 
Technical Data Sheet
CleverCLEAN PRO for bathroom and toilet green cleaning set (TDS)
Date of generation: 06.01.2021
CleverCLEAN PRO for bathroom and toilet green cleaning
Pool element treatment
Optically transparent protective coating for effective easy cleaning surfaces using in restrooms, toilets, washrooms and bathrooms.
Cleaning product used in care of bathroom furniture, sanitary ware, sinks, basins, toilet bowls, wall tiles, shower stalls, bathroom counter tops and other vanity units made from metal, ceramics, glass and plastic.
Product description
Product made from organic mixture liquid polymers which stays intact for a long time if not being exposed to air. Mixture of polymers has excellent fluidity and can distribute itself to a surface by a very thin layer. 1g of the products easy covers 1m2 of the surface.
Product have excellent adhesive properties (product stick to the surface very well). Coating is formed on top of the surfaces is optically transparent and in many cases improves the looks and fixes defects by filling small cracks and scratches.
There is metal oxides nano particles composition inserted into polymer composition. Nano components inside the products create continuous, invisible to eye layer of small particles.
Included to polymers nano particles have the biggest covering area you can imagine and even on a small concentration of nano particles is enough to cover all applicable area completely.
It obtains to coating a super hydrophobic effect so that water drop easy rolls down from surface with possible contamination. It leads to self-cleaning car glass of driving vehicle with small speed when water drops with dirt easy rolling out from glass. It calls as “Lotus effect”.
In same time component of nano composition decompose the organic contamination in protected surfaces. Because it creates under sunlight charged radicals “worked” as oxidizer for organic matter. It calls as “ photo catalytic cleaning effect”.
Technical information
| Parameter | Specification |
| Appearance | Milk color oily liquid |
| Boiling point, °C min. | 197 |
| Density at 20 °C | 1,010-1,048 |
| Melting point, °C max. | -55 |
| Viscosity dynamic at 20 °C | 15-25 |
| Flash point, °C, min. | 119 |
| Solubility | Alcohol, Ether, Acetone |
Removing coating from surface is possible with alcohol (ethyl or isopropyl), also by steam and next mechanically with microfiber cloth.
Surface preparation
Surface must be dry and clean before applying first time. For re-coating necessary only dry surface. It is not recommended to treat the car window glass inside car salon because super hydrophobic surface can be reason of the unwanted sweat in glass.
Application
For application recommended microfiber cloths: terry structure for distribution/removing exceed of the product and plane (polish) structure for polishing coated surface. Both cloths must be prepared from 20% polyamide and 80% polyester and density not less 250g/m2
Coat is possible under any outdoor temperature.
Recommended use product quantity as less as possible. Consumption is only 3g/m2 with possible losses. Useful coating in surface is only 1g/m2.
1.Shake the bottle before use. Little wet terry cloth with product Cloth.Terry without excess. Close cap after use.
2.Evenly distribute the product on dry surface by Cloth.Terry.
3.Wait 3-5 min.
4.Remove exceed the product by same terrycloth.
5.Polish by plain cloth Cloth.Polish the surface.
6.Don’t expose the surface by rain or by action with wet cloth about 1,5-2 hours. Protective surface is obtained the best protection in 12 hours after coating.
Product hazards and safety information
See Safety Data Sheet for complete Health and Safety information. Do not use in confined areas without the proper safety precautions/equipment.
Additional data
Product is prepared according to existing legislation European Union. Product has not volatile matter and holds the nano components tight inside its structure. Nano particles cannot be separated one from polymer mixture. It guarantees that nano-sized particles do not get “loose” and incur to human organism and harm our health and surrounding environment. Product waster
Lasting effect: 2 weeks min and depend from external environment.
450g CleverCLEAN PRO for ceramics and sanitary ware. Bar code: 474269200074
Packing of the CleverCLEAN PRO for bathroom and toilet green cleaning set
Product is packed in 450g bottle.
20 bottles in carton;
Carton’s size: 25cm х 36cm х 25cm
Carton’s gross weight: 10.32kg
Pallet: 72 cartons/1140 bottles
Pallet’s size: 120cm x 100cm x 215cm
Pallet’s gross/net weight: 743kg/768kg
Labels in three languages: English, Estonian, Russian;
Order customized labels is beginning from 500 units min. per product.
Shipping and export information
Non-hazardous for any transportation.
Export HS code: 3405909000