Short description about nano powders and their use
Nano-powders. Using. Properties
NTitanium
High purity nano Titanium Dioxide - anatase and rutile. Average particle size is 100nm max
Nano Disperse Titanium Dioxides have good transparency, and excellent UVA and UVB absorbency, compare with normal titanium dioxide properties. Nano titanium dioxide is insoluble in water, organic acid and weak inorganic acid, and insoluble in sulphuric acid, alkali and hydrofluoric acid.
Description
Nano Titanium Dioxide description
NTitanium-01 – anatase titanium dioxide, included other metals and oxides additions. it may be used as photo-catalyst material. The material emits electrons under light illumination with wavelength 400nm. It is created on surface electricity charged zone, which affects to absorbed oxygen (O2) and to water (H2O) and active anion radicals are generated. These radicals efficiently decompose of hazardous gases and organic pollutions. This effect knowing as Photo Catalysis. Due to Photo Catalysis properties, material can be used as antiseptic widely used in air purification and in sewage treatment. NTitanium-01 has high stability with wide light absorption spectrum. It is not expensive.
NTitanium-01W and NTitanium-01Mn have highest Photo Catalyst activity. NTitanium-01N has also good Photo Catalyst activity. These materials can be uses for decomposition the automobile exhaust, increasing fuel combustion efficiency and sewage treatment and so on.
NTitanium-02 - rutile type Titanium Dioxide, has good screening function against ultraviolet ray. It is mixed with Zinc Oxide. Under the joint action of ultraviolet ray and oxygen, it has strong bactericidal power. Material can be used in sunscreen cosmetics, functional chemical fiber, high-grade plastics and other fields.
NTitanium-03 - rutile type Titanium Dioxide, has hydrophilic property. Average grain size is 80nm max. specific surface is 30m2/g with fine and smooth feeling and strong comfortable feeling, suitable for sun screening agent in cosmetics.
NTitanium-04 - has same properties as NTitanium-03. Difference is hydrophobic and lipophilic properties.
NTitanium-03H and NTitanium-04H - have same properties as NTitanium-03 and NTitanium-04, only for cosmetics. Ones better absorb UVA and UVB compare with organic additives and well compatible with other raw materials in cosmetics. These materials are ideal additive of the sunscreen, anti-ultraviolet rays.
Range of application
- UV-resistant additive to, chemical fiber, plastics, printing ink, coatings.
- Photo catalysis, production of self-cleaning glass, self-cleaning ceramics, antibacterial materials, air purification, waste treatment, chemical industry.
- Packing materials used in food processing.
- Coating in pulp and paper production, titanium production and titanium based alloys and other alloys in metallurgy.
- Cosmetics, sunscreen creams, natural white moisture protection creams, beauty and whitening creams, morning and night creams, moistening refreshers, vanishing creams, skin protecting creams, face washing milk, skin milk, powder make-up.
- Airspace industry
Recommended dosage
As this series of products has a wide area of application, the range is also wide: 0.5-8%, depending on the purpose of using the product.
In using the product as a screening agent, the following concentrations are basically applied: 1-3% for screening agent, 3-5% for whitening and moisture preservation, 3-8% for UV ray resistance in cosmetic materials.
About a 2.5% concentration is used for printing ink and coating.
In every specific case, contact us to be updated on recommendations. However, customers are to run the final test of the product on their own.
NSilica
Nano disperse silicon oxide has a very large specific surface area. Material has an unsaturated structure of alkyl type with different bonding types. The material properties with Pro.Silica additives are considerably different from additives of the conventional refined micron-silicon oxide. Due to this, these products are widely applied in many industries.
Nano silicon oxide has a small particle size, with a large specific surface area
Materials exhibit an unsaturated, alkyl structure with different bonding types. The properties of the materials having nano silicon oxide additives are considerably different from additives of the conventional micron-silicon oxide. This enables to apply silicon oxide in a wide variety of industries.
NSilica-01 and NSilica-02 have a specific surface area. Other products belong to the series are different depending on different modes of surface treatment from HTSi-03 to HTSi-08.
Description
Nano Silicon oxide description
nontoxic, odor neutral, environment friendly white powder having a stable chemical structure.
Depending on its surface treatment, it becomes hydrophilic or hydrophobic.
These products can be applied in various forms: As powder, hydraulic fluid or transparent liquid.
Nano silicon oxide can also be applied as a screening agent to protect against UV and infrared radiation.
In addition to the materials indicated in the Table, we can offer materials with a particle size, specific surface area and treatment form meeting the customer’s requirements. We customize our offers!
Range of application
- Chemical industry, plastics, coating, rubber, pigment, sealant, fibreglass reinforced plastics, high-grade organic glass.
- Electronics, electronic packaging material, ferrite material, battery
- Ceramics, nanoceramics, composite ceramic substrate
- Medicine and pesticide carrier, artificial teeth
- Cosmetic trade, UV resistant material
- Antibacterial materials
- Optical and lighting fixture
- Building and water-proof material
Recommended dosage
The quantity to be added differs and mainly depends from system, ranging from 0.5% to 5% and is determined by the user through test. The user may also contact with us for the actual quantity to be add.
NZincOxide
Nano Zinc Oxide is white or pale yellow powder with the average particle size: 20 nm for NZincOxide-01 and 40 nm for NZincOxide-02
Nano zinc oxide in this range exhibits special properties compared to conventional zinc oxide. The Other types of the product are different depending on different surface treatment modes used.
Description
Nano Zinc Oxide description
These products can be applied with both organic and inorganic materials. Exhibit the following specific functions: screening and UV rays absorption, sterilizing.
Used as a heat or freezing insulator.
Nano zinc oxide can improve the operating characteristics, render rubber wear and tear resistance stronger and improve the basic mechanical properties.
Due to its unique antibacterial function, the wear-resistant zinc oxide is widely used in advanced antibacterial and self-cleaning ceramics, floor tiles, coating, and plastics and as other applications.
Can also be used in fabricating piezoresistors, luminophor, and image recording materials due to its excellent electrical and optical properties.
Range of application
- Vulcanizing active agent applied in rubber industry, catalytic additive in petrochemical industry, most significant material in automobile tire, aircraft tire and industrial cable manufacture as well as in zinc oxide ceramics.
- Used in coating, paint and varnish items, transparent rubber, emulsion and plastics to increase burst strength, compactness, adhesion.
- Antimicrobial and bacteriostatic agent, deodorant, medical and sanitary bactericidal material, glass and ceramic bactericidal and self-cleaning materials, in fabricating bactericidal special purpose clothes used by medical personnel.
- Electronic industry, instrumental industry, manufacture, electrical device, radio, wireless fluorescence lamp, image recorder, rheostat, phosphor
- Sun screening agent used in cosmetics, antibacterial and health protection antiager.
Recommended dosage
Generally the proposed quantity is 1-5%. The user should determine the quantity to be added according to different systems and through testing.
NMagnesium
Nano Oxides, Carbonates and Magnesium Hydroxides - white powder, odor neutral, non toxic. Exhibits unique properties and can be used as a catalyst in ceramic, oil processing, in textile industry, for the synthesis of a brand new and high-performance fire retarding agent and as an ideal material for the development of industrial fabrics.Exhibits unique properties and can be used as a catalyst in electronics and ceramics, oil refining, in textile industry, for the synthesis of brand new, high-performance fire retarding agents and as an ideal material for the fabrication of industrial fabrics.
Nano Magnesium powders description
Small size of particles and their uniformity enhance the aggregation strength of the materials. These compositions enable to manufacture wear and tear resistant coatings, plastics and rubber products, optical glass and ceramics. They can also be used in rendering weather resistance, enhancing strength and making more transparent.
After surfaces are treated by nano compositions based on magnesium compounds, they become hydrophilic and lipophilic.
Range of application
- Fire retardant used for chemical fiber and plastics.
- High-temperature dehydrating agent used for the production of silicon steel sheet, high-grade ceramic material, electronic industry material, adhesive and additive in the chemical raw material.
- High-frequency magnetic-rod antenna, magnetic device filler, insulating material filler and various carriers used in radio industry.
- Refractory fiber and refractory material, magnesite -chrome brick, filler for refractory coating, refractory and insulating instrument, electricity, cable, optical material, material for steel-smelting furnace and other high- temperature furnaces, heating material and ceramic base plate.
- Electric insulating material for making crucible, smelter, insulated part (tubular component), electrode bar, electrode sheet.
- Fuel additive, cleaner, anti static agent and corrosion inhibitor.
Recommended dosage
The quantity range to be added 0.5-5%. The user should determine the optimal quantity to be added according to own system and through testing or contact us
NAluminiumOxide
White loose powder of Aluminum Oxide of two types depending on the type of crystalline lattice (α-type and γ-type). The crystal of NAluminiumOxide-01 is α-nm Al2O3, its particle size ≤80nm, specific surface area ≤10m2/g. NAluminiumOxide-02 crystals are γ-nm Al2O3, their particle size is ≤20nm and specific surface area is ≤200 m2/g, with well dispersed and high purity. Other types of the product are dependent on different surface treatment modes: from NAluminiumOxide-03 to NAluminiumOxide-06.
Description
White crumbling Aluminium Oxide powder of two types: α-type and γ-type. The crystalline lattice of NAluminiumOxide-01 is α-nm Al2O3.
Range of application
- Transparent ceramics: high voltage sodium lamp.
- Additives for cosmetic industry.
- For growing artificial mono crystal jewels.
- For fabricating high strength alumina ceramics, C base plates, packaging materials, cutting-tools, high purity crucibles, spools, bombardment targets, furnace tubes.
- In coatings, rubber fabrications, for obtaining stronger wear and tear resistance of plastic materials, as a hydrophilic material.
- Coating, rubber, wear resistant reinforce of plastic products, hydrophobic material.
- Fine polishing material, glass, metal, semiconductor materials, plastics, magnetic tapes, in fabrication of grinding belts.
- As a material for vacuum coatings, used in fluorescent materials, special glass and composite materials.
- Activator, catalytic base plate, analytical reagent.
Recommended dosage
The quantity can range within 1-5%. The user should determine the quantity through testing. Please contact us if required.
NZirconiumOxide
Nano zirconium oxide is a white powder. Exhibits a monoclinic structure at low temperatures and tetragonal structure at high temperatures. Soluble in sulfuric acid and hydrofluoric acid, and exhibits good thermo chemical stability, high-temperature conductivity, higher heat strength and ductility. Exhibits excellent mechanical, thermo chemical, electrical and optical properties. NZirconiumOxide-01 is of monoclinic structure, while NZirconiumOxide-02 is of tetragonal structure.Exhibits a monoclinic structure at low temperatures and a tetragonal structure at high temperatures.
Soluble in sulphuric acid and hydrofluoric acid and is highly thermo chemically stable, heat resistant and moldable. Exhibits excellent mechanical, thermo logical, electrical and optical properties. NZirconiumOxide-01 has a monoclinic structure, while NZirconiumOxide-02 has a tetragonal structure.
Nano Zirconium Dioxide description
Nano disperse Aluminium Oxide can be used in growing synthetic jewel materials, analytical reagents, in production of nano catalysts.
Being a stable oxide with small particle sizes, nano zirconium is acid as well as alkali resistant to corrosion and high-temperature resistant.
Can be used in technical ceramics, structural ceramics and jewel materials. Its properties are greatly better compared to the micro zirconia oxide.
Range of application
- Functional ceramics, inorganic pigments, high-purity pigment, porcelain glaze.
- Pyro optical elements, in high oxygen-sensitive elements, high-value capacitors, optical storage, image display elements, light modulated elements, light shutters, stereotelevision glasses, image storage and display elements.
- In abrasive and insulating materials, fire-retarding materials, X-ray equipment.
- In high-temperature and corrosion resisting components, bearing nozzles, smelting crucibles.
- In piezoelectric elements, ion exchangers, solid dielectrics, filters, temperature and pressure transmitters and transmitting elements, electrode used for magnetic-current generator, heating element.
- In artificial jewellery.
- Additives to fuel, battery.
Recommended dosage
The quantity range to be added 1.0 - 10.0 %. The user should determine the optimal quantity to be added according to own system and through testing or contact us.
NAntimonyOxide-NTinOxide
Nano Tin oxide doped with Antimony OxideNano Disperse Mixture of tin oxide and antimony oxide – a blue powder. The basic application: heat insulator, anti-corrosion agent.
The basic application: heat insulator, anti-corrosion agent. Exhibits good conductivity and can be widely used in the fabrication of coatings, chemical fibers and polymeric membranes as an anti-static material and other applications.
Nano antimonium-tin oxide description
The product exhibits excellent electrical and optical properties. Due to its good conductivity, it can be widely used in the fabrication of coatings, chemical fibers and in polymeric membranes as an anti-static material.
The mixture exhibits stronger properties in dispersion, is stronger weather and wear resistant and thermoplastic than other conductive materials such as graphite, surfactants, and metallic powders, etc. This material can also be used in fabrication of optoelectronic display devices, transparent electrodes, solar batteries, liquid crystal displays, catalysis and other applications.
Range of application
- It can be used in LCD, LED and ECD
- transparent electrodes and solar batteries
- As a heat shield when it is used in infrared radio transparent mirrors, in glass containing panels for walls.
- In fabrication of car, train and plane glass to protect against fog and frost exposures.
- Due to its capacity of reflecting microwaves, it can be used as a screen in computer equipment and radar shielding and other areas where protecting against electromagnetic radiation is necessary.
Recommended dosage
The range quantity to be added 1-10 %. The user should determine the optimal quantity to be added according to own testing and if necessary contact us.
NLithium-IronPhosphate
Nano Disperse powder of lithium and iron phosphates improves considerably the battery cycle. Applied in fabrication of cathode materials for lithium ion accumulators. Formulation containing nano disperse silica and aluminum compounds. Stronger wear resistance.Nano Disperse powder of Lithium and Iron Phosphates improves greatly the charge time and battery cycles and is used in production of cathode materials for lithium ion batteries
Nano powder Lithium and Iron Phosphate description
Average particle size is less than 40 nm, with a capacity of more than 150 mAh, and a cycle life longer than 2000 times. These properties are impossible to be achieved by conventional materials. Batteries are resistant to self-inflammation and detonation, even if overcharge reaches 30V. Lithium ion batteries with nano disperse powder exhibit higher characteristics compared to the conventional batteries.
Range of application
- Large-scale electric vehicles (trolley buses, electric and hybrid vehicles).
- In medical equipment, special equipment, such as invalid wheelchairs, in hoisting equipment driven by accumulators.
- In devices used in generating electric power.
- Robotics.
Recommended dosage
Please contact us if required.
NWearResistant
Formulation containing Nano Disperse Silica and Aluminium compounds. Increases coating wear-resistance. Uniform particle size powder. White color. Powders have a uniform distribution of particle size. NWearResistant-01and NWearResistant-02 have: particle size - 450nm and weight by volume - 0,6 g/cm3. NWearResistant-03 has the particle size of less than 5mkm
Wear resistant compounds description
Nano disperse Aluminium Oxide can be used in growing synthetic jewel materials, analytical reagents, in production of nano catalysts.
It can greatly improve luminous intensity, when using in fabrication of luminescent materials.
Its application as a plasticizer and reinforcing agent in ceramics and artificial rubber production is several times more efficient compared to the conventional aluminum oxide.
Of special use is in fabricating uniform void-free materials, enhancing their additional strength properties.
Nano aluminum oxide can be used as the basis for producing crystals for YGA lasers.
Range of application
- Wear-resistant coatings, rubber, plastics
- Used in production of optical glass, ceramics, electronics.
Recommended dosage
For NWearResistant-01 and NWearResistant-02 0.5 – 5%; for NWearResistant-03 – 6-15%. This is determined by the user testing. Please contact us if required.
NFarInfrared
Non-metallic materials compositions with the particle size of 100nm max. Radiation treatment in normal direction – more than 85 %.A non-metallic composition with a particle size of less than 100nm. Can emit infra red waves with a wavelength 8-15mkm
Radiation in normal direction is more than 85%. NFarInfrared-01 is a white powder. NFarInfrared-02 is tinted powder.
The best radiance is provided by the NFarInfrared-02 product. The other types are different depending on the types of treating the particle surfaces.
Far Infrared non-metallic compositions description
The products are odorless, nontoxic and environment friendly, hygroscopic. The product can absorb and emit infrared radiation emitted by our body, which is positive for blood circulation; renders hyperoxemia lower, enhances metabolism and immunity.
Range of application
- Fabrication of textile, clothes, bed clothes, health strengthening products etc.
- Plastics, ceramics, paper making.
- Medical equipment and instruments.
Recommended dosage
The recommended concentration is 2-4%. For master batches containing 40% of an active component, the recommended dosage is 6-8%. The user is to determine the specific quantity through testing. Contact us if required!
NUVShielding
Ultraviolet radiation shield.
The formulations are active absorbent of ultraviolet rays with a wavelength of 250 – 380 nm
Nano disperse powders are capable of protecting against a damaging UV impact, screen solar radiation, are used as an ageing retarder. The NUVShedulding-01 and NUVShedulding-01 materials have different mixtures (component ratios).
The formulations have various levels of protection against UV and were designed especially to be used in various industries: fabrication of rubber, plastic membranes, coatings, printing ink etc.
Nano UV Shielding powder composition description
The formulations are efficient absorbents of UV rays with a wavelength of 250-380nm.
This factor protects against UVA and UVB radiation spectra.
This keeps a nice visual effect of the products and makes a service life 10-20 times longer.
The formulations are odorless, non-toxic and skin neutral.
Lipophilic and hydrophilic properties.
Exhibit good dispersion in solvents and plastics. The product may be added into a solvent or into a molten product directly. It can be used as a master batch with an active part content of 10-20%.
Range of application
Special fiber with the function of UV shielding fabrics and items based thereon.
Cosmetics such as sunscreen creams and talc powders.
Plastics, coatings and printing ink with the property of shielding UV.
Recommended dosage
The recommended concentration is 3-6%. The user is to determine the optimal quantity through testing. Contact us if required.
NBactericidal
Nano disperse inorganic anti-bacterial powders containing silver ions and ions of other metals by way of ion exchange absorption of these substances by basic nano compositions. The NBactericidal products are widely used and heat resistant.
A series of Nano Disperse Inorganic Anti-Bacterial formulations with additives of silver ions and ions of other metals, by way of absorbing these substances by the basic compositions
The NBac products are widely used. also developing, heat resistant properties. Choice of the product is dependent on the application area.
Inorganic bactericidal composition description
Compared to organic anti-bacterial products, the inorganic anti-bacterial nano materials are highly temperature resistant, capable of distributing uniformly in various materials, are highly reliable and exhibit a long lasting sterilizing property.
Can be added to water and organic solvents.
The powder exhibits a uniform particle size distribution and is well compatible with the basic materials.
The product is resistant up to 350 C temperatures when used in the plastic mass technologies and produces no side effects.
The product series renders items more wear resistant when exposed to washing, more age retardant, prevents bacteria transfer. The coatings are efficient in protecting against the known types of bacteria, fungi, fermentation substances, mold, algae, etc.
Range of application
- Textile fiber products: clothes, bed clothes, curtains, cosmetic packs, bags.
- Water treatment facilities.
- Ceramic materials, pottery sanitary ware, floor and wall facing materials.
- Home appliances: refrigerators, washing machines, air conditioners, computers, lamps and cameras.
- Packing materials.
- Decorating materials: coatings, wall papers, carpets and other kinds of indoor decorating materials.
- Medical care.
Recommended dosage
The recommended concentration is 0.5-3%. The user is to determine the optimal dosage through testing. Contact us if required!