Download technical data sheet in PDF format  …  Home.Interior Technical Data Sheet

Technical Data Sheet

Home.Interior (TDS)

Date of generation: 06.01.2021

Intended uses of the Home.Interior

Protected hydrophobic worktop

Protected hydrophobic worktop

Product for easy clean house interior designed for painted and varnished furniture (as furniture polishes), glass parts of the home interior, plastic, household appliances, electronics and electrical devices.

Product description

Product made from organic mixture liquid polymers which stays intact for a long time if not being exposed to air. Mixture of polymers has excellent fluidity and can distribute itself to a surface by a very thin layer. 1g of the products easy covers 1m2 of the surface.

Product have excellent adhesive properties (product stick to the surface very well). Coating is formed on top of the surfaces is optically transparent and in many cases improves the looks and fixes defects by filling small cracks and scratches.

There is metal oxides nano particles composition inserted into polymer composition. Nano components inside the products create continuous, invisible to eye layer of small particles.

Included to polymers nano particles have the biggest covering area you can imagine and even on a small concentration of nano particles is enough to cover all applicable area completely.

It obtains to coating a super hydrophobic effect so that water drop easy rolls down from surface with possible contamination. It leads to self-cleaning car glass of driving vehicle with small speed when water drops with dirt easy rolling out from glass. It calls as “Lotus effect”.

In same time component of nano composition decompose the organic contamination in protected surfaces. Because it creates under sunlight charged radicals “worked” as oxidizer for organic matter. It calls as “ photo catalytic cleaning effect”.

Technical information

Parameter Specification
Appearance Milk color oily liquid
Vapor Density, air = 1 not determined
Volatility,% not determined
Boiling point, °C min. 185
Melting point, °C max. -50
Evaporation rate not determined
Viscosity, cSt 15-25
Specific Gravity, g/cm3 1,020-1,105
Flash point, °C, min 69
Auto ignition Temp., °C, min not determined
Solubility Alcohol, Ether, Acetone

Removing coating from surface is possible with alcohol (ethyl or isopropyl), also by steam and next mechanically with microfiber cloth.

Surface preparation

Surface must be dry and clean before applying first time. For re-coating necessary only dry surface.

Application

For application recommended microfiber cloths: terry structure for distribution/removing exceed of the product and plane (polish) structure for polishing coated surface. Both cloths must be prepared from 20% polyamide and 80% polyester and density not less 250g/m2

Recommended use product quantity as less as possible. Consumption is only 3g/m2 with possible losses. Useful coating in surface is only 1g/m2.

  • Bottle shake 1.Shake the bottle before use. Little wet terry cloth with product Cloth.Terry without excess. Close cap after use.
  • Evenly distribute the product on dry surface by Cloth.Terry. 2.Evenly distribute the product on dry surface by Cloth.Terry.
  • Wait 3-5 minutes 3.Wait 3-5 min.
  • Remove exceed the product by same terrycloth. 4.Remove exceed the product by same terrycloth.
  • Polish by plain cloth Cloth.Polish the surface. 5.Polish by plain cloth Cloth.Polish the surface.
  • After protection 6.Don’t expose the surface by wet or by action with wet cloth about 1,5-2 hours. Protective surface is obtained the best protection in 12 hours after coating.
Product hazards and safety information

See Safety Data Sheet for complete Health and Safety information. Do not use in confined areas without the proper safety precautions/equipment.

Additional data

Product is prepared according to existing legislation European Union. Product has not volatile matter and holds the nano components tight inside its structure. Nano particles cannot be separated one from polymer mixture. It guarantees that nano-sized particles do not get “loose” and incur to human organism and harm our health and surrounding environment. Product waster

Lasting effect: 1-2 months depend from external environment.

200ml Home.Interior set. Bar code: 4742692000048

200ml Home.Interior set. Bar code: 4742692000048

Packing of the Home.Interior

Product is packed in a convenient plastic bag, where you will find:
200ml trigger sprayer bottle;
Microfiber cloths 30cm x 30cm: terry and polish;
Inlay with user manual.

20 sets carton:
Carton’s size: 38cm х 59cm х 22cm;
Carton’s gross weight: 7.40kg;

Pallet: 40 cartons/800 bottles
Pallet’s size: 120cm x 100cm x 192cm
Pallet’s gross/net weight: 300kg/321kg

Shipping and export information

Non-hazardous for any transportation.
Export HS code: 3405909000